How To Fix A Pull Chain On A Table Lamp? DIY Home Repairs

Pull chains are a common feature on table lamps, and although they seem quite straightforward, they can be a bit temperamental. Thankfully, replacing the chain is an easy DIY repair that requires only basic tools. Follow these steps to get your pull chain up and running again!

Step 1: Locate the pull chain

  • Look for the pull chain in the lamp. It is usually on the base of the lamp or near the light socket.
  • If you can’t find the pull chain, unscrew the light bulb and look for the cord that leads to it. It may be wrapped around a metal post or hidden behind a plastic cover.
  • Pry off the old cord with a screwdriver or blade if necessary and replace it with a new one. Pull tight to secure it in place.
  • Reinstall the light bulb and screw it in place. Make sure the cord is well-wrapped around the metal post or plastic cover so it doesn’t get tangled up again.
  • Test your new pull chain by pulling on it a few times to make sure it’s working properly.

Step 2: Buy a Replacement Chain

The first step is to purchase a replacement chain. Measure the current chain so you can find one that’s an exact match, or look for something similar. Make sure the size and weight of the new chain match your old one as closely as possible.

Step 3: Remove The Old Chain

Once you have the new chain, it’s time to remove the old one. Begin by disconnecting the power source for your lamp. Then, unscrew the light socket and carefully detach the chain from it. Once the chain is removed, discard or recycle it.

Step 4: Attach The New Chain

Now that you have a new chain, it’s time to attach it. Take the new chain and thread it through the light socket in the same way as the old one. Make sure you don’t twist or cross any of the links as this will affect how the switch functions. Once you have threaded it through, make sure that all of the links are secure and properly attached.

Step 5: Test The Chain

Finally, it’s time to test the chain. Reconnect the power and switch on the light. Pull the chain once or twice to make sure that it functions as expected. If you find that there are any issues with the chain, repeat Steps 2-4 until you get a satisfactory result.

Related Topic: How To Hide Lamp Cords On Console Table?

Step 6: Connect the Lamp to the Power Source

  • Remove the lamp’s shade.
  • Locate the three screws that secure the cord reel to the base of the lamp.
  • Use a Phillips head screwdriver to remove the screws.
  • Pull out the cord reel.
  • If necessary, use a wire brush to remove any residual glue from the pull chain mechanism.
  • Reattach the cord reel by screwing it into place and tightening the screws.
  • Reattach the shade.

Related Topic: How To Repair A Table Lamp In 7 Easy Steps?

Tips To Keep Your Pull Chain Working

To ensure that the pull-chain switch on your table lamp continues to function correctly, here are some tips to keep in mind:

Make sure that the weight and size of the chain you use matches your old one as closely as possible.

When you are threading the new chain through, take great care not to twist any of the links.

If your lamp is exposed to moisture, clean it regularly using a soft cloth and mild detergent.

When you are pulling the switch, make sure that you don’t pull too hard or tug on it suddenly, as this could cause damage to the chain and switch mechanism.


Fixing a pull chain on your table lamp is a relatively simple task that just about anyone can do. With the right tools and materials, you can easily complete this DIY project yourself in no time! However, if you have any doubts or need help with the process, don’t hesitate to call a professional for assistance.

While there are some potential risks associated with DIY projects, following the steps outlined in this article will help you to safely and effectively complete your pull-chain repair. Good luck!


How to fix a pull chain lamp socket?

If your pull chain lamp doesn’t turn on, there is a good chance that the socket is broken. You can fix it by replacing the socket with a new one. First, remove the light bulb from the socket by unscrewing it. Second, remove the wire from the connector on the light bulb.

Finally, replace the connector with a new one and screw it back in place. Finally, reattach the light bulb to the socket.

How to replace a plastic lamp socket?

If your plastic lamp socket is broken, you will need to replace it. There are a few different types of sockets available, so be sure to find the right one for your lamp.

First, unscrew the old socket from the lamp. Next, find a replacement socket that matches your lamp’s specifications. Finally, screw the new socket onto the lamp.

Related Topic: What Size Lampshade For Table Lamp? How to Choose

What is the difference between a pull chain switch and other types of switches?

A pull-chain switch is a type of light switch that is operated by pulling and releasing the chain in order to turn the light on and off. This type of switch is typically found in ceiling fans, lamps, and other fixtures where a manually operated switch is more convenient than an electric one.

1 thought on “How To Fix A Pull Chain On A Table Lamp? DIY Home Repairs”

Leave a Comment