If you have a touch lamp at home, you know how convenient and easy to use it can be. All that’s required is a simple tap of the finger and voila! lights on. But like any electrical device, sometimes things go wrong. If your beloved touch lamp has stopped responding to your taps and you’re wondering how to fix it, then read on.
In this guide, we’ll take a look at troubleshooting a touch lamp and show you all the steps you need to get it working once again.
What Makes a Touch Lamp Not Working?
There are a few things that can make a touch lamp not work. The most common problem is that the lamp is not getting enough power.
Touch lamps need a lot of power to work properly, so if the batteries are low or there is something blocking the power cord, the lamp may not work.
Another common problem is that the sensors in the lamp are dirty or damaged. If the sensors are not working properly, the lamp will not be able to detect when you touch it and will not turn on.
1. Check The Bulbs
The first thing you should do is make sure that the bulbs are securely screwed into their sockets. If they’re a bit loose, it can affect the lamp’s sensor and stop it from responding to your touch. So check the bulb is properly fitted and if necessary, tighten them with a cross-head screwdriver.
2. Clean The Sensor
The next step is to clean the sensor on the base of the lamp. It can become dirty over time, which can prevent it from working properly. To clean it, use a soft cloth and some rubbing alcohol to wipe off any dirt or grease that may have built up on it. Then, let the sensor dry before you attempt to turn the lamp back on.
3. Check The Wiring
If both of the above steps have been done and your touch lamp is still unresponsive, then it may be a wiring issue. You should check that all wires are securely connected to the correct terminals on both the power board and the bulb sockets. If you find any loose connections, securely reconnect them and turn the lamp back on.
4. Check The Power Source
If all the above steps have been done and your touch lamp is still not working, then it could be a power source problem. To check this, plug another electrical device (such as a small fan) into the same socket that your lamp is plugged into, and see if it works.
If it does, then the issue lies with the lamp itself – if not, then it’s likely a problem with the power source. In this case, you should check that all of your other electrical devices are working properly and if not, contact an electrician to get them checked out.
5. Call An Electrician
If none of the above steps have worked for you, then it’s time to call in the experts. An electrician can come and take a look at the lamp, diagnose what’s wrong, and get it up and running again.
It may be necessary to replace some of the wiring or components on the lamp so you should always call an experienced electrician if you are not confident with electrical repairs yourself.
Related Topic: How Does A Touch Lamp Work?
How to Replace a Touch Lamp Sensor?
Step 1: Disconnect the Lamp and Prepare Your Work Area
Before you start, unplug your lamp from the mains and place it on a flat work surface in an area with plenty of lighting. You may also wish to spread out some newspaper or cloth as you’ll be dealing with small components which can be easily lost.
Step 2: Remove the Lamp Shade and Top Cover
First, carefully remove the lamp shade from the fixture. Once this is done, you may need to unscrew and lift off a top cover to access additional components inside the touch lamp. Depending on your particular model of touch lamp, this can involve simply popping off or unscrewing a cover plate.
Make sure to keep all the screws and components you remove, as these may be necessary when replacing your sensor.
Step 3: Locate the Sensor
Next, you’ll need to locate the old sensor in order to replace it. Look for a small black box-like component near the base of the lamp fixture. This is usually connected to both the circuit board and a screw terminal, from which several wires may be coming out.
Step 4: Remove the Old Sensor
Now it’s time to remove your old sensor. First start by unplugging any electrical connections leading into or out of the sensor box, then unscrew any screws holding it in place. Once loose, you can carefully remove the sensor from your touch lamp.
Step 5: Fit the New Sensor
Once you have removed the old sensor, it’s time to fit the new one. You should have received a replacement sensor with instructions on how to fit this – generally speaking though, you will need to connect all electrical connections in the same way as before, then screw it securely into place.
Step 6: Test Your New Sensor
The last step is to test your new sensor and see if it’s working correctly. To do this, simply switch your lamp on at the mains and give the touch-sensitive areas a few gentle taps with your finger – if the lamp is working as it should, it should switch on and off with each tap.
If you find that your sensor isn’t responding correctly to taps or that the light flickers erratically, then you may need to double-check all electrical connections attached to the new sensor – making sure they are secure and in place.
If everything looks good but the lamp is still malfunctioning, then you may need to replace your sensor again.
Other Issues With The Touch Lamp
There are a few other issues that can come up with touch lamps. If the light starts flickering, it could be a sign that the lamp is going bad and needs to be replaced.
If the light won’t turn on at all, check to make sure that the bulb is screwed in correctly and that there is power going to the outlet.
Touch Lamp Maintenance Tips
To ensure that your touch lamp stays working properly, it’s important to do regular maintenance on it. This includes cleaning the bases of the bulbs and power board regularly with a damp cloth, replacing any broken parts, checking all wiring connections are secure, and replacing the batteries in the remote if necessary.
These simple steps will help to keep your lamp in perfect working order.
It’s also important to ensure that you use the correct type of bulbs for your lamp – check the specifications before buying any replacement bulbs. And finally, never attempt to repair a touch lamp yourself if you’re not confident with electrical repairs, and always call an experienced electrician instead.
Touch lamps are an attractive and convenient way to light up your home, but can sometimes require a bit of troubleshooting. Fortunately, with the right approach, you should be able to get your lamp working again in no time. When all else fails, don’t forget that you can always call in the experts for help.
With proper maintenance and care, your touch lamp should last for many years to come.
However, it’s important to remember that not all lamps are created equal and some may require more specialized attention. If you find yourself in this situation then don’t hesitate to contact a specialist – they will be able to provide the help you need to get your lamp working properly again.
Related Topic: How To Fix A Cloudy Lava Lamp Without Opening?
Can touch-sensitive lamps be repaired?
The answer is yes, touch-sensitive lamps can be repaired. If the lamp is not working properly, it is most likely due to a problem with the wiring. A qualified electrician will be able to diagnose and fix the problem.
How do I reset my touch lamp?
To reset a touch lamp, you will need to find the reset button. This is usually located on the bottom of the lamp base. Once you have found the reset button, press and hold it for three seconds. This will reset the lamp and return it to its factory settings.
What kind of bulb goes in a touch lamp?
A touch lamp is a lamp that is turned on and off by touching it. It usually has a special bulb that is made to work with the touch feature. These bulbs are usually more expensive than regular bulbs, but they last longer.
Are touch lamps a fire hazard?
While regular lamps have a switch that turns them on and off, touch lamps are activated by touching the base of the lamp. This can be convenient, but it also poses a potential fire hazard.
If the lamp is accidentally knocked over, it could easily start a fire. It’s important to make sure that you keep your touch lamp out of reach of children and pets.
Related Topic: What Happens If You Touch Lava Lamp Liquid?
How much does it cost to repair a touch lamp?
The cost to repair a touch lamp can vary depending on the severity of the damage. If the touch sensor is not working, it may just need to be replaced. This can cost around $30. If the entire lamp needs to be replaced, it can cost up to $100.